New RV LED Awning Light Set with WIFI controller. Compatible with Android and IPhone
Over 16 Feet of super bright RGB color changing LED Lights to light up your RV, camper, mobile home, awning or boat.
This is a RGB LED Light Strip feet long. This light strip is waterproof.
This kit is specifically designed for recreational vehicles, but can be used as decorative indoor or outdoor applications.
Decorate your deck or gazebos or inside on top of your kitchen cabinets or under a table. The strip is held in place by it's adhesive backing
Product Description
This controller support IOS 6.0 version
It can achieve remote control ,switch light,adjust brightness
.There are 16 million
colors and dozens of light changing modes.In addition.
This controller is designed for LED strip, module etc. After easy
installation and settings, you can use your Phone
(IOS 6.0 or Android system
for Samsung 4.3 version or above) to control.
The remote control distance reach 8-10 meters.
Specifications:
Connection Methods: Wifi
Software language:English , automatic recognize language
according to OS.
Working Temperature:-20~60C
Working Voltage:DC12V
Output channel:4CH/RGB
Output current:2x3A
Effective Remote Distance: 8-10M.
Size:86*45*23mm
What's included in this kit:
- 1 16' Pc. of 5050 Waterproof LED strip light. This LED Light strip is RGB which can switch hundreds of combinations of the colors . 5050 LED light strip comes with 16' feet with 300 LEDs that change from hundreds of different color combinations.
- 1 x Wifi controller compatible with Android and IPhone software with color changing capability and different flashing and strobing modes. Change from a cool subtle color change or a fast and vibrant strobe effect.
- 110v power cord
How to install
- This strip can be mounted in many places; Use it for under cabinet or foot board lighting. Accent walls, hard to reach cubby holes and tables.
- Select the location where you want to mount the light, take in account how you want to get the 12 volt power to this strip. We suggest starting the wire end of the strip near a power source.
- Clean the mounting surface with rubbing alchohol. Remove the 3M backer and install end to end. Please be careful and plan ahead, this channel will not come off once it has been applied.
- Remove the 3M backer from the LED strip, then apply.
- Connect the Strip light wire lead to any 12V or 110v switched source and enjoy your new LED lights for 50,000 plus hours.
- Note: This is very easy for any DIY to do.
Don't forget to add any of our accessories like our 3ft or 16 ft -
4 wire extension so you don't need to wire your receiver box so high.
We also sell additional IR and RF remotes that can be switched out
for different uses as well as replacement plugs and adaptors. Just
ask us and we can send you a link or look in our ebay store.